≡ Menu

Circuit Breaker Tripping? 3 Causes and Ways to Fix It

Did you know that static electricity was discovered by the ancient Greeks 600 years ago? The Romans used batteries as far as electricity. 

In this article, we’ll take a look at circuit breaker tripping and what can be causing it. Read on to explore these causes and how to fix them today!

Checking for a Circuit Overload

A circuit overload occurs when you have an electrical current that goes through wires which then causes them to overheat and trip the circuit breaker. If you notice that the power goes out in only one part of your home, then that’s known as a single circuit. Your first plan of action should be to contact a residential electrician to restore your power in no time. 

To test for it, when you’re having circuit breaker issues, go to your electrical panel and turn off all of the switches. Make sure to unplug all appliances as well and other devices including your light. Turn the breaker back on and have switches on while they’re plugged in. 

Circuit Breaker Terms

The watts are the total power that an appliance uses. The amps are the amount of electricity that flows through your wires. 

Different Problems

You might notice wiring mistakes. Problems in the wiring can cause your circuit breaker to trip. In severe cases, it can cause electric shock. In order to fix this, you’ll want to seek professional help. 

If you notice a humming sound, this is when your circuit breaker is overloaded. This is when it’s overloaded and hasn’t shut down. Or, it can mean a connection problem. If you notice lights flickering whether it’s one or all, you might be experiencing faulty wiring. 

1. Short Circuit

A short circuit is a common but dangerous reason that the breaker keeps tripping. A short circuit is a hot wire that comes into contact with a neutral wire in an electrical outlet. This leads to an overload of a current to flow through the circuit. 

2. Ground Fault

A ground fault is when a ground wire and hot wire touch the metal box that houses them. This causes a chain reaction of more electricity to go through the circuit which causes the breaker to trip. 

3. Overloaded Circuit

This is when circuits or an electrical system can’t hold the amps that come through the circuit. This flips the breaker and can cause a fire, or damage electronics. 

Resetting Your Tripped Circuit Breaker

First, turn off your breaker by moving the handle or switch off and then turn it back on. Make sure that you stand back for safety reasons. This is due to any sparks that might come out. 

Have batteries and a flashlight ready in case the power is out. Have the circuit breaker rest for a few minutes before you unplug and replug it. 

Knob and Tube Wiring

If you have knob and tube wiring, this is dangerous and you’ll want your electrical system upgraded. You’ll want the electrical panel box replaced since this method is outdated and old. 

Circuit Tripping

If you’re experiencing circuit tripping, it’s best to leave it to the professionals since it can be dangerous. A new appliance can have much more power than you realize.

Never ignore the problem of a circuit breaker. This can lead to more electrical problems later on. 

Replacing Your Circuit Breaker

If you’re looking to replace your circuit breaker, you’ll first want to turn off all branch circuit breakers. Next, ensure that the main breaker is off as well. 

Use a voltage tester to make sure that the panel isn’t receiving electricity. You can also use a screwdriver to remove the wire from the terminal and move it. 

Take out the old breaker and pay attention to how it looks and fits into the panel. Place the new breaker into the panel. 

Next, attach the circuit’s load wire onto the terminal. Tighten and check any loose terminal screws on the breakers. 

Make sure that all breakers are in the off position. Replace the panel cover and turn on the main breaker. Next, turn each of the branch circuit breakers individually and use the voltage meter in order to test each breaker. 

It’s a good idea to replace circuit breakers since they’re inexpensive. It’s a good idea to replace them in order to not take the chance of hurting yourself or your family from the old breaker. Keep in mind that circuit breakers can last for decades but they don’t last forever. 

Fixing Your Circuit Breaker

First, check for any loose wires. Make sure to replace any loose wires that you find. 

Next, check all of your appliances. A circuit breaker can trip when there’s a short in the appliance.

Also, check the exterior of the cord of the appliance. Make sure that there’s no black/brown discoloration or burning. 

Before you reset the circuit breaker, check your appliances that are connected to the circuit. If there are more than necessary then you’ll want to move them to another circuit/room. Contact a professional since your safety is number one for you and your family. 

What To Do When You Experience A Circuit Breaker Tripping

Now that you’ve explored how to check for a circuit breaker tripping and what to do, you should have a better idea of what problem you’re facing. Are you looking for more business content? For everything from small businesses to different types of small businesses, check out our other articles on our site today.