Have you heard of horizontal directional drilling, HD Drilling, or horizontal directional drilling (HDD)?
If you’re in the drilling industry, you probably know what it is. If you’re not in the industry, you’re probably thinking, “What is it?”
Imagine if you could access your well-bores precisely, reliably, and cost-effectively. The horizontal directional drilling (HDD) system is the capacity to reach deeper into an industrial well while avoiding damaging your pipeline.
So what is HDD? Find out how it works and how you can benefit from it as you dig deeper.
Read on!
What is a Horizontal Directional Drilling?
Horizontal directional drilling is a type of drilling that is used to make long, horizontal holes in the ground. This type of drilling is often used to make holes for pipelines or other types of well drilling or utility lines. HDD drilling is typically done by using a large drill rig that is capable of drilling through large amounts of rock.
How Does Horizontal Directional Drilling Work?
Horizontal directional drilling is a process used to install underground utilities, such as sewer, water, and gas lines. The process involves drilling a hole in the ground at a specific angle, then installing the underground utility in the hole. HDD drilling is an efficient and cost-effective way to install underground utilities.
Using Mud Motor for HDD Drilling
What is a mud motor? A mud motor is a downhole motor used in drilling rigs that circulates drilling fluid (“mud”) through the motor to lubricate and cool the bearings, minimize friction, and transmit power to the bit. Mud motors are used in drilling rigs when rotary drilling is not possible or practical, such as when drilling through hard rock or when mud motor drilling is required.
Mud motors are classified according to the type of power transmission, a number of stages, and the number of bearings. The most common type of mud motor is the positive displacement mud motor, which uses pistons to transfer fluid power to the bit. Multi-stage mud motors have more than one set of pistons and can provide more torque and power than single-stage mud motors.
Mud motors are an essential tool in horizontal directional drilling (HDD), as they allow the drill bit to “walk” across the bottom of the hole while remaining in contact with the formation. This is accomplished by continuously circulating drilling fluid through the mud motor, which cools and lubricates the bearings and provides power to the bit.
Benefits of Horizontal Directional Drilling
Horizontal directional drilling, or HDD, is a type of drilling used to install pipes and cables. These are done in areas where traditional digging methods are not possible or practical.
HDD is perfect for environmentally sensitive areas. It can also be applicable for areas that are difficult or have limited access. This type of drilling is also less disruptive to above-ground infrastructure. It allows the job to be completed quickly and efficiently.
HDD has many advantages over traditional dredging methods. It is less invasive, causes less damage to the surrounding environment, and is less disruptive to above-ground infrastructure. HDD is also less likely to cause groundwater contamination.
Consider Horizontal Directional Drilling
This is an efficient and non-invasive way to drill for resources and has a small environmental impact. It is also less expensive than traditional drilling methods. We should continue to explore horizontal directional drilling as a way to access the resources we need.
For more helpful industrial topics or other general reads, visit our blog page.
